Colour and finish options

Available within 3 weeks.

For technical reasons paint colours may not match exactly to the samples shown and should be used for illustrative purposes only.  It should also be noted that due to manufacturing tolerances, radiators ordered and produced may also differ in finished colour from any previously ordered. Please contact us to arrange for colour charts or swatches to be posted before ordering.

Commodore Stocked

The Commodore Manual Valve set has the same traditional look as the popular Faringdon valve set but have been designed to take a heavier flow rate and has adapters that enable them to be connected to a wider rage of pipes and radiators. As standard the valve is supplied with a 15mm pipe compression inlet and a 1/2″ radiator threaded coupler. Available to order is a 22mm pipe compression inlet and a 3/4″ radiator threaded coupler, these will be supplied in the same finish as your valve. Decorator’s cap available separately. Decorator’s caps are used to fully isolate TRV valves, whilst a radiator is removed for decorating.

From: £107.16

Clear

Designed to fit 15mm valves to reduce compression nut to fit either 8mm or 10mm micro-bore pipe work.

Adapter designed to allow valve to be fitted to 22mm pipe work.

Adapter designer to fit valve into a 3/4″ radiator bush

Designed to allow you to fully shut down your TRV body allowing you to remove a radiator with out draining down your heating system.

Product summary

SKU WES/COM/V/M Categories , , Tag